Filter By:
- Bar Ends (11)
- BMX (35)
- Bottom Brackets (210)
- Brakes/Levers/Pads (536)
- Cables (137)
- Cassettes/Freewheels (135)
- Chainrings (250)
- Chains (140)
- Show More Categories
- Cranksets (261)
- Derailleurs (186)
- Forks (151)
- Groups (25)
- Handlebar Grips/Tape (273)
- Handlebars (220)
- Headsets (147)
- Pedals (219)
- Recumbent (5)
- Saddles (327)
- Seatposts (91)
- Shift/Brake Combinations (76)
- Shifters (129)
- Shocks (25)
- Stems (130)
- Other (1680)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts
- Perforated leather handlebar tape
- Genuine perforated leather
- Kit includes: 2 strips of light, perforated leather bar tape, 2 rubber bar end plugs and 2 adhesive cloth strips
- Self Adhesive: Yes
- Tape Length: 215mm
- Complete shifter and brake cables and housing kit
- Low friction, prelubricated casing
- Cable Material: Stainless Steel
- Cables & Housing: Comp.Campagnolo Ergopower Ultra-Shift
- LEV has always represented the latest technology but is already a classic among top contending dropper posts.
- With myriad of firsts to its name; first hydraulic dropper to offer zero cable movement, first dropper to win a UCI World XC Eliminator event and first in countless enduros, magazine tests and customer satisfaction polls, LEV IS the first dropper seatpost to outperform itself.
- Eten-I rounds out the lower end of the KS internally routed dropper post spectrum with a post that is perfect for new riders just getting used to the idea of on-the-fly seat height adjustment or more experienced riders looking for a value-priced solution.
- Eten-I uses the same head and cartridge as the Eten Remote but moves the cable interface to the bottom of the post for compatibility with frames accommodating internally routed cables.
NEW: Please refer to our chart for the correct adapter size you need.
Disc brake adaptors available for Shimano, SRAM, Hope, Hayes, Formula, etc. rotors:
CNC machined from 6061 T6511 aluminum. Machined surfaces allow for better caliper alignment and a more rigid brake setup.
The Post Mount standard is universal for front and rear brakes.
Frames and forks that use the post-mount brake interface use a stock size varying from 160mm to 203mm. It’s important to check your frame and fork for the default post mount size before ordering a suitable adapter.
To calculate the size of the required adapter, subtract the frame/fork stock mount size from the desired rotor size.
If you’re using brakes with large calipers (Magura MT5/MT7, Hope Tech V4, Hayes Dominion A4, etc.), please also order a low profile (button head) bolt kit to ensure correct fitment.
Our disc brake adapters do not come with mounting bolts but if needed, we have sets of 4 bolts available.
Not currently compatible with TRP 203mm rotors.
CNC machined from 6061 T6511 aluminum. Machined surfaces allow for better caliper alignment and a more rigid brake setup.
The Post Mount standard is universal to front and rear brakes.
Frames and forks that use the post mount brake interface use a stock size that varies from 160mm - 203mm. It’s important to check your frame and fork for the default post mount size before ordering a suitable adapter.
To calculate the size of the required adapter, subtract the frame/fork stock mount size from the desired rotor size.
- Comfort in an affordable first-class saddle.
- Padded with Slow Fit Foam, a memory foam that molds to rider's body.
- The foam matrix open cell structure confers increased elasticity and breathability to guarantee a durable and comfortable saddle
- Integrated Clip System (ICS)
- Comfort in an affordable first-class saddle.
- Padded with Slow Fit Foam, a memory foam that molds to rider's body.
- The foam matrix open cell structure confers increased elasticity and breathability to guarantee a durable and comfortable saddle
- Integrated Clip System (ICS)
- Pair of K-Type disc brake pads without fins, for one caliper
- Choice of compound: Resin, for improved modulation & lower noise, or Metallic, for improved durability & higher braking power in muddy conditions
- Steel backplate for lower cost or Ti backplate for improved heat management and lower weight
- Fits all Shimano flat mount gravel & road disc calipers, including Dura Ace BR-R9170, Ultegra BR-R8070, 105 BR-R7070, GRX BR-RX810 and BR-RX400
- Also compatible with XTR BR-M9100 calipers
- Interchangeable with L-type finned pads (except for XTR BR-M9100)
- Pair of L-Type brake pads with fins, for one caliper Ice Technologies fins & aluminum backplate cools down the brakes in use, which improves braking consistency and power and reduces brake fade, especially in long descents
- Choice of compound: Resin, for improved modulation & lower noise, or Metallic, for improved durability & higher braking power in muddy conditions
- Longer lasting than K-Type pads
- Interchangeable with K-type finless pads
- Fits all Shimano flat mount gravel & road disc calipers, including Dura Ace BR-R9170, Ultegra BR-R8070, 105 BR-R7070, GRX BR-RX810 and BR-RX400
- NOT compatible with XTR BR-M9100
- Lightweight Design
- Steel rings with engineering polymer spacers
- Nickel finish
- 8 Speed compatible
- Weight—346g
- Dual pivot caliper brake
- Melt forged aluminum arms
- Quick release mechanism
- Dimension : 39-52mm
- Designed for 28C tire
Wolf Tooth headsets are machined here in our Minnesota shop with aircraft-grade 6061 aluminum. They are designed to be lightweight, strong, and durable. Our headsets have three levels of industry-leading custom sealing to protect bearings from the elements and prolong the life of the headset. Available in a variety of colors. These ZS headsets are for frames with internal bearing cups that are pressed into the frame. Premium Headsets with Enduro stainless steel bearings have a lifetime warranty.
Upper assembly features:
- Ultralight stem cap with integrated spacer plus an aluminum bolt and a star nut.
- 6, 15, and 25 mm stack height top cover options (6mm cover = 6mm total stack, 15mm cover = 15 total stack, 25mm cover = 25mm total stack).
- O-ring seal prevents water intrusion around the steerer tube.
- Custom-molded upper lip seal provides additional protection for the upper bearing.
$0.16
Parts for repair and maintenance of DT Swiss hubs.
- DT Swiss 240s Shim Ring
$0.16
Parts for repair and maintenance of DT Swiss hubs.
- DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings
$0.90
Replacement small parts for Hope disc brake Hope disc brake calipers.
$0.99
Internally fitting service parts for Hayes hydraulic disc brake master cylinders.
- All HFX-MAG compatible master cylinder internals are designed for the current aluminum piston/2mm push-rod platform (2003 and newer).
$1.00
Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.
$1.00
Looking to get a little extra distance so that your derailleur clears your 40 or 42 tooth cog? Look no further.
- M4 x 24mm screw for that extra little push
$1.20 - $36.00
- Allows quick chain removal without tools
- MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~|
- MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~|
- MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~|
- MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~|
- MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~|
- MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~|
- MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|
$1.30
Replacement piston and seals for Hope disc brake calipers.
$1.50
KMC 3/16" Master Link Chain Links
- For 3/16" chain, extra wide
- Extra-wide, for non-derailleur bikes: BMX, cruisers, etc
- Perfectly fits on KMC 415H & 415H-NP chains
$1.95
Replacement end plugs for the GA2, GA2 Fat, and GA3 grip models.
- One size.
- Sold as a pair.
- Fits Ergon GA2, GA2 Fat and GA3 models only.
- Designed to fit Trail / All-Mountain MTB handlebars on the market today.
$1.95
Replacement right and left Ergon logo bar plugs. Features the Ergon logo in a vibrant white color. You have the choice of a plug set of the barend and non-barend models
- Right and Left soft plastic bar plugs.
- Sold as a set only.
- Fits most handlebars.
- Can be trimmed to fit various handlebar thicknesses.
- Plug set for GP and GS grips with barends - fits GP2, GP3, GP4, GP5, GS2 and GS3 models only
- Plug set for GP1, GC1 and GS1 grips - fits GP1, GC1, and GS1 only
$1.99
HFX-Mag/-9, El Camino, Stroker Caliper-Hose Connection Seal
$2.00
FSA Mega Exo Small Parts.
$2.00
FSA Mega Exo Small Parts.
$2.00 - $2.99
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension
- Uses standard chain pin connector and tool
$2.00 - $5.00
- 3-spline steel cogs for use with Sturmey 3-speed (and 5-speed) internal gear rear hubs
- Flat or dished for tuning chainline. Xylan coating for greater durability
$2.00
- 3-spline steel cogs for use with Sturmey 8-speed internal gear rear hubs - Flat or dished for tuning chainline. Chrome plated
$2.00
- Replacement retaining clip for the Surly Tuggnut/Snuggnut
$2.42
Parts for the service of the seal and restore the smooth cycling of KS dropper posts.
$2.50
Replacement piston and seals for Hope disc brake calipers.
$2.50
Replacement piston and seals for Hope disc brake calipers.
$2.50
Use to create your desired chain length in single-speed applications. Only one half link is needed.
- Non-reusable
- Width: 9.4 mm
- Drivetrain Speeds: 1
- Color: Black
- Chain Compatibility: Shimano , SRAM , Campagnolo , Connex , KMC
$2.80
Parts for repair and maintenance of DT Swiss hubs.
- DT Swiss Spacer Sleeve - 10.1mm, for 3-pawl
$2.99
Air Spring Volume Reduction Kit
- Cane Creel Kitsuma Air 1250^3 Negative Volume Reducer
$2.99
- For Race Face 30mm Cinch System cranks only
- Allows switching crank arms between bikes, such as a FatBike and an XC MTB
- Use RF-2999 for 8mm to 16mm hex wrench adapter to remove spindle
$2.99
M5 bolts to mount your flat mount caliper to the frame. Sold as a QTY of 2.
$3.00
FSA Mega Exo Small Parts.
$3.00
FSA Standard Headset Bearings
$3.00
FSA Mega Exo Small Parts.
$3.00
KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs.
- Compatible with KMC K710 and K710SL chains
- No tools needed
$3.00
Internal components for servicing the Reverb and Reverb Stealth mechanism.
Page 1 of 89
Next page