Filter By:
- Show More Brands
- Show Fewer Brands
Tools
$389.95
The SHX-1 Slide Hammer Extractor is a professional solution specifically designed for removing press fit cartridge bearings from bicycle components. Utilizing expanding collets, an extendable shaft, and a substantial (960g) slide hammer, the SHX-1 securely yet forcefully drives out cartridge bearings with targeted impact. The SHX-1 is compatible with cartridge bearings with inner diameters from 6 to 32 millimeters, covering most press fit applications found on bicycles including hubs, suspension linkages, and bottom brackets.
- Set of 5 expanding collets covers most bicycle bearing IDs from 6mm to 32mm
- Slide hammer shaft is extendable from 6.5" (165mm) to 13" (233mm) for additional force when needed
- Organized in a convenient storage case
$232.14
The 2197 is an add-on accessory for the Park Tool DT-5 and DT-5.2 Disc Brake Mount Facing Set to enable easier and more efficient facing of disc brake mounts on carbon fiber frames. Features a brazed-on diamond grit surface that is over 100 times more durable and effective on carbon fiber than the cutter included with the DT-5.2. The 2197 sits between the cutter of the DT-5.2 and the brake mount, and smoothly and evenly grinds the mounting surface until it is flat and properly perpendicular to the rotor.
NOTE: The 2197 is intended for facing carbon fiber only. Aluminum, steel, and titanium disc brake mounts should be faced using the #2171 facing cutter included with the DT-5.2. For carbon frames that feature aluminum inserts (with a carbon/aluminum hybrid mounting surface), use the #2197. When machining carbon fiber, regularly apply water (or a similar solution) to the cutting surface.
$289.95
The SBK-1 is a professional level kit for installing and removing cartridge bearings in bicycle suspension pivots. A comprehensive set of 27 precision-machined hard-anodized guides enables compatibility with a wide range of bearing inner and outer diameters. Combined with our proven bearing press design, the SBK-1 quickly and easily pushes the old bearing out of the linkage and reinstalls the new bearing precisely and squarely.
- Magnetic back plate for easy configuration and assembly
- Organized in a convenient storage case
Includes extractor cups/drifts for the following ODs:
- 16mm
- 17mm
- 19mm
- 20.6mm
- 21mm
- 22mm
- 22.3mm
- 24mm
- 26mm
- 28mm
- 28.6mm
- 30mm
- 32mm
- 35mm
Includes extractor studs and pilots for bearings with the following IDs:
- 8.5–9mm
- 10mm
- 12mm
- 12.7mm
- 15mm
- 17mm
- 20mm
NOTE: For bearing extraction, the SBK-1 requires a minimum of 3mm of flat linkage structure outside the bearing to support the extractor cup/drift. For bearings without this flat structure, consider using the Park Tool SHX-1 Slide Hammer Bearing Extractor.
$429.95
The BBP-AOS is used in conjunction with the BBP-1.2 Bottom Bracket Bearing Press Kit to extract press fit bottom bracket bearings, cups, and adaptors. The BBP-AOS utilizes an expanding collet and extractor cup system to safely remove bearings without requiring impact. Also included are eight installation drifts for pressing bearings into pre-installed cups.
- 8 precision-machined extractor cups and 5 hardened collets for compatibility with most bearing IDs and bearing/cup ODs
- 8 installation drifts for standalone bearing installation
- Organized in a convenient storage case
- Full list of compatible bearing inner/outer diameters found on instructions/parts diagram
NOTE: The BBP-AOS requires the BBP-1.2 Bottom Bracket Bearing Press Set for use. The BBP-1.2 and BBP-AOS are also available as a complete set (part # BBP-2).
$204.95
Park's Dial Indicator Gauge Set mounts to their TS-2 or TS-2.2 Truing Stand (sold separately). The set makes it easy to view and correct a wheel's lateral and radial run-out within a tolerance of .01mm. Compared to going by the gap between the truing stand pointer and rim, having gauges that put a number on the clearance makes wheel truing easier and more accurate.
$269.95
- Precision tool for quickly and easily removing the headset crown race from the crown race seat of the fork
- Fully adjustable, allowing precise, independent positioning of each blade around the crown race for flexibility in fitting around crown race interferences
- Works with 1,1-1/8,1-1/4,1.5" forks (suspension or rigid) and crown races with outside diameters up to 64mm
- Accepts steerers up to 430mm
- All steel construction for long life
$229.95
Park's HHP-2 accurately aligns and presses 1-, 1-1/8-, 1-1/4- and 1.5-inch headset cups into your frame's headtube. It features a quick-release design for fast tool installation and removal, extra-long handles for superior leverage and stepped bushings for precise cup alignment. This versatile tool also presses cartridge bearings and cups into one-piece bottom bracket shells and holds fixed-cup wrenches in place when removing or installing adjustable-type bottom brackets.
$373.95
Frame and Fork Taps will become a lifesaver at some time for virtually every mechanic. These taps are made of high-carbon steel and are precision ground. Park Tool's Frame and Fork Taps cut easily and fit conventional tap handles.
- Tap-12.1: 12Mm X 1.0
- Tap-12.2: 12Mm X 1.5
- Tap-12.3: 12Mm X 1.75
- Tap-15.1: 15Mm X 1.0
- Tap-15.2: 15Mm X 1.5
- Tap-20.1: 20Mm X 1.0
- Tap-20.2: 20Mm X 1.5
- Tap-20.3: 20Mm X 2.0
$344.95
- The HBP-1 is designed to quickly and accurately press bearings into a wide variety of cartridge bearing-type bicycle hubs.
- Quick release design for fast tool installation and removal
- Includes two bearing presses and precision machined aluminum pilots, bushings, and spacers
- Works with more than 20 different cartridge bearing sizes and multiple axle configurations
$469.95
The DT-5.2 is engineered and built to accurately face front or rear disc brake mounts so they are precisely aligned to the rotor.
- Faces any IS Mount, Post Mount, or new Shimano Flat Mount, including low clearance, chainstay mounts
- Telescoping axle adaptors allow use with any configuration of open or thru-axle dropouts and dropout widths (including Boost 110, Boost 148 and all fat bike axles)
- Includes two facing cutters:
IS Mounts
Post and Flat Mounts
- Includes storage case
$379.95
We put together this set of carefully chosen tools to do basic maintenance and cleaning as well as perform a wide variety of repairs and adjustments on just about any bicycle. A perfect way to start or add to your collection of shop-quality bicycle tools. The AK-5 includes a tough toolbox to protect your investment.
Kit Includes:
- AWS-1 3-Way Hex Wrench
- BBB-4 Big Blue Book of Bicycle Repair
- CC-4 Chain Checker
- CM-5.3 Cyclone Chain Scrubber
- CN-10 Professional Cable and Housing Cutter
- CNW-2 Chainring Nut Wrench
- CT-3.3 Chain Tool
- DCW-1 Double-Ended Cone Wrench: 13/14mm
- DCW-2 Double-Ended Cone Wrench: 15/16mm
- DCW-3 Double-Ended Cone Wrench: 17/18mm
- DH-1 Dummy Hub
- DT-2 Rotor Truing Fork
- FR-5.2 Cassette Lockring Tool
- GSC-1 GearClean Brush
- HCW-16.3 Chain Whip/Pedal Wrench
- HXS-1.2 Professional L-Shaped Hex Wrench Set
- MLP-1.2 Master Link Pliers
- PAW-12 12" Adjustable Wrench
- RR-12 Tape Measure
- SD-2 #2 Phillips Screwdriver
- SD-3 3mm Flat Blade Screwdriver
- SW-0 Precision Spoke Wrench: .127"
- SW-2 Precision Spoke Wrench: .136"
- TL-1.2 Tire Lever Set
- TWS-3 Torx Compatible 3-Way Wrench
- VC-1 Valve Core Tool
$262.95
Park Tool's Crown Race Cutter Adaptor is used in conjunction with the CRC-1 Crown Race Cutting Tool (sold separately) to machine 39.8mm crown race seats (1.5” standard) on tapered forks with 1-1/8” steerer tubes. It includes a precision-machined adaptor body and a 39.8mm high-speed steel crown race cutter. The CRC-15 will work on forks with a maximum 1.5-inch taper of 4.25 inches.
$349.95
The BX-2.2 features updated pallet configuration and storage options to help you keep your tools secure and easily accessible. The expanded custom designed tool pallets, including dual-sided pallet wings, are all housed in a virtually indestructible composite travel case. Designed and built for the traveling mechanic who demands the best!
- Custom designed tool-holding pallets with loops and pockets
- Folding, dual-sided pallet wings
- Front tool pallet that stores securely inside during transport
- Dent-proof composite shell built around an aluminum frame
- Key lock
- Nominal dimensions: 19" x 14.85" x 8.5" (48.25 cm x 37.7 cm x 21.6 cm), 13.2 lbs. (6 kg)
Page 1 of 1